Differences

This shows you the differences between two versions of the page.

--- infoblox_nios:management [2022/11/30 11:58] – created bstafford
+++ infoblox_nios:management [2024/12/20 14:31] (current) – bstafford
@@ Line 2: / Line 2: @@
 If you add or remove the MGMT configuration of a member, the member will reboot.
-The MGMT interface must be in a subnet that is seperate from LAN1.
+[[infoblox_nios:deploy_nios_vm#mgmt_port|Notes on configuring MGMT port]]
+The MGMT interface must be in a subnet that is separate from LAN1.
 If you delete a member from the Grid GUI, the member will reboot and come back up with the same IP it has.
+MGMT Port
+  * Create appliance
+  * Boot appliance
+  * Set LAN1
+  * Connect to Web UI
+  * Use web UI to set MGMT port
+  * Appliance reboots
+  * Use CLI to set membership
+  * CLI wizard will ask if you want to use the MGMT port for Grid VPN.
+You can edit the MGMT interface of one none in a HA pair. It will reboot that node but not the other node of the HA pair.
+If MGMT port is enabled on a node, then the node will use that port to communicate with the reporting server (if there is one)