Differences

This shows you the differences between two versions of the page.

--- microtic:install_vm [2021/06/09 14:36] – bstafford
+++ microtic:install_vm [2022/11/23 12:49] (current) – external edit 127.0.0.1
@@ Line 19: / Line 19: @@
       * Address field should be 10.1.1.7/24 (example)
       * Network field should be 10.1.1.0 (example)
-  * Create a bridge for each interface (fifth option from top) (or just one bridge)
+  * Create a single bridge for the first interface eth1 that connect to the hypervisor. (fifth option from top)
-  * Create Bridge Ports that map a bridge to an interface for each interface ( Port tab in Bridge Window)
+  * Create a Bridge Ports that masp the bridge to interface  eth1 ( Port tab in Bridge Window)
+  * Create a NAT rule (IP > Firewall)
+      * Chain: srcnat
+      * Src. Address 10.2.2.0/23
+      * Dst. Address 0.0.0.0/0
+      * Out. Interface : bridge1
+      * (Under action tab) action: masquerade