Differences

This shows you the differences between two versions of the page.

--- paloaltonetworks:hardware:sfp [2020/05/21 09:41] – created bstafford
+++ paloaltonetworks:hardware:sfp [2022/11/23 12:49] (current) – external edit 127.0.0.1
@@ Line 41: / Line 41: @@
 I have tested Amphenol SFP+ DAC cables on PA-5220 firewalls running PANOS 8.1 and found they work fine. Vendor part number is 588680003.
+===== Palo Alto Networks SFP SKU Codes =====
-===== HSCI Cables =====
+==== HSCI Cables ====
 Palo Alto Networks offer three cables where the transceivers are bonded to the cable.
   * **PAN-QSFP28-AOC-10M** is a 10m active optical cable with two 100Gb QSFP28 transceivers bonded to it. It is for the HSCI ports of the PA-5250 and PA-5260 firewalls as these firewalls' HSCI ports are 40/100Gb QSFP28.
@@ Line 50: / Line 50: @@
 You can also buy the transceivers without the cables and attached a cable of the correct length. However, this is more expensive than buying the bonded cable when considering QSFP/QSFP28.
-For HA2 connections, a "Cat 6" or "Cat 6a" ethernet cable may suffice for the HA2 link requirement. Remember, "Cat 6a" can support 10Gbs. The PA-5200 series of Palo Alto Networks firewalls support 10Gbps on their Ethernet ports.
+For HA2 connections, a "Cat 6" or "Cat 6a" Ethernet cable may suffice for the HA2 link requirement. Remember, "Cat 6a" can support 10Gbs. The PA-5200 series of Palo Alto Networks firewalls support 10Gbps on their Ethernet ports.
-===== SFP Types =====
+==== SFP Types ====
   * 1 Gbit/s multi-mode fiber, LC connector, with black or beige extraction lever
@@ Line 69: / Line 69: @@
 ^ Type ^ Description ^ PAN Part ^ Pan Description ^ Supported Models ^ Finisar Part # ^ nm ^ Extraction Lever Shape ^ Extraction Lever Colour ^ Finisar Overview ^ Product Specification ^
 | 1000Base-T| RJ-45 version| PAN-SFP-CG or PAN-SFP-CG-AO| SFP form factor, 1Gb copper transceiver, 100m over Cat5 RJ-45, IEEE 802.3ab 1000BASE-T compliant| PA-7000 Series, PA-5000 Series, PA-5200 Series, PA-4000 series, PA-3000 Series, PA-3200 Series, PA-2000 Series, PA-800 Series| FCLF8522P2BTL / FCLF-8521-3 | N/A| N/A| N/A| | [[https://www.finisar.com/sites/default/files/downloads/finisar_fclf852xp2btl_1000base-t_rohs_compliant_copper_sfp_transceiver_product_specification_0.pdf|Specification]][[https://www.finisar.com/sites/default/files/downloads/finisar_fclf-8520-3_fclf-8521-3_1000base-t_copper_sfp_optical_transceiver_productspecreve1.pdf|Specification]] |
+| 100BASE-FX | 100Mbps transceiver for the maximum distance of  |  PAN-SFP-100BASE-FX | SFP form factor, 100BASE-FX 100Mbps transceiver, 2Km reach, 62.5µ/125µ MMF, duplex LC, IEEE 802.3 clause 38 1000BASE-LX compliant | PA-200R Series |  | |  |  | | |
 | 1000Base-SX | Multimode fiber for the maximum distance of 550 m | PAN-SFP-SX | SFP form factor, SX 1Gb optical transceiver, 550m reach on OM2 MMF, duplex LC, IEEE 802.3z 1000BASE-SX compliant | PA-7000 Series, PA-5000 Series, PA-5200 Series, PA-4000 series, PA-3000 Series, PA-3200 Series, PA-2000 Series, PA-800 Series |  | |  |  | | |
 | 1000Base-LX | Single-mode fiber for the maximum distance of 10 km | PAN-SFP-LX | SFP form factor, LX 1Gb optical transceiver, 10Km reach, SMF, duplex LC,  IEEE 802.3ab 1000BASE-LX compliant | PA-7000 Series, PA-5000 Series, PA-5200 Series, PA-4000 series, PA-3000 Series, PA-3200 Series, PA-2000 Series, PA-800 Series| FTLF1318P3BTL| 1320nm| Round| Blue| [[https://www.finisar.com/optical-transceivers/ftlf1318p3btl|Overview]]| [[https://www.finisar.com/sites/default/files/downloads/finisar_ftlf1318p3btl_industrial_temp_1.25g_rohs_compliant_long_wavelength_sfp_transceiver_productspecrevb2.doc.pdf|Specification]] |
 | 1000Base-ZX| Single-mode fiber for the maximum distance of 80 km| PAN-SFP-ZX| SFP form factor, ZX 1Gb optical transceiver, 80Km reach, SMF, duplex LC| PA-7000 Series, PA-5000 Series, PA-5200 Series, PA-4000 series, PA-3000 Series, PA-3200 Series, PA-2000 Series, PA-800 Series|  | |  | |  | |
-===== SFP+ Types =====
+==== SFP+ Types ====
+^ Type ^ Description ^ PAN Part ^ Pan Description ^ Supported Models ^ Finisar Part # ^ nm ^ Extraction Lever Shape ^ Extraction Lever Colour ^ Finisar Overview ^ Product Specification ^
+| 10GBASE-SR| Multimode fiber for the maximum distance of 300 m| PAN-SFP-PLUS-SR| SFP+ form factor, SR 10Gb optical transceiver, short reach 300m, OM3 MMF, duplex LC, IEEE 802.3ae 10GBASE-SR compliant| PA-7000 series, PA-5450, PA-5200 Series, PA-5060, PA-5050, PA-3200 Series, PA-3060, PA-850| FLTX8574D3BCL| 850nm| Flat| Beige| [[https://www.finisar.com/optical-transceivers/ftlx8574d3bcl-0|Overview]]| [[https://www.finisar.com/sites/default/files/downloads/finisar-ftlx8574d3bcl-10gbase-sr_sw-400m-multimode-datacom-sfp-transceiver-product-specification-revb.pdf|Specification]]|
+| 10GBASE-LR| Single-mode fiber for the maximum distance of 10 km| PAN-SFP-PLUS-LR| SFP+ form factor, LR 10Gb optical transceiver, long reach 10Km, SMF, duplex LC, IEEE 802.3ae 10GBASE-LR compliant| PA-7000 series, PA-5450, PA-5200 Series, PA-5060, PA-5050, PA-3200 Series, PA-3060, PA-850| FTLX1471D3BCL| 1310nm| Flat| Blue| [[https://www.finisar.com/optical-transceivers/ftlx1475d3bcl|Overview]]| [[https://www.finisar.com/sites/default/files/downloads/finisar_ftlx1471d3bcl_rohs-6_compliant_10gbs_10km_single_mode_datacom_sfp_transceiver_product_specification_0.pdf|Specification]]|
+| 10GBASE-ER| Single-mode fiber for the maximum distance of 40 km| PAN-SFP-PLUS-ER| SFP+ form factor, ER 10Gb optical transceiver, extended reach 40Km, SMF, duplex LC, IEEE 802.3ae 10GBASE-ER compliant| PA-7000 series, PA-5450 (NC only), PA-5200 Series, PA-5060, PA-5050, PA-3200 Series, PA-3060, PA-850;| | | | | | |
+| 10GSFP+Cu| Direct Attach cable - 5 Metres| PAN-SFP-PLUS-CU-5M| SFP+ form factor, 10Gb direct attach twin-ax passive cable with 2 transceiver ends and 5m of cable permanently bonded as an assembly, IEEE 802.3ae 10GBASE-CR compliant| PA-7000 Series, PA-5450, PA-5200 Series, PA-5060, PA-5050,PA-3200 Series PA-3060, PA-850| | | | | | |
+| | 10GB copper transciever| PAN-SFP-PLUS-10GBASE-T| SFP+ form factor, 10Gb copper transceiver, 30m over Cat6a RJ-45, IEEE 802.3an 10GBASE-T compliant| PA-7050-SMC-B, PA-7080-SMC-B, PA-7000-100G-NPC-A, PA-7000-20GQXM-NPC, PA-5450 (NC only), PA-5200 Series, PA-5050, PA-5060, PA-3060, PA-850; | | | | | | |
+Note: PAN-SFP-PLUS-10GBASE-T is not supported on the PA-3200 series. Its ommision from the list supported firewalls is not a typo.
+==== QSFP+ Types ====
+QSFP+ is 4 x 10 Gbit/s
+^ Type ^ Description ^ PAN Part ^ Pan Description ^ Supported Models ^
+| | Multi-mode fiber for the maximum distance of 100 m | PAN-QSFP-40GBASE-SR4 | QSFP+ form factor, 40Gb SR4 optical transceiver, short reach 100m OM3, 12 strand MPO connector, IEEE 802.3ba 40GBASE-SR4 compliant | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+|  | Single-mode fiber for the maximum distance of 10 km | PAN-QSFP-40GBASE-LR4 | QSFP+ form factor, 40Gb LR4 optical transceiver, long reach 10Km, SMF, duplex LC, IEEE 802.3ba 40GBASE-LR4 compliant | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+|  |  | PAN-QSFP-40GBASE-LM4 | QSFP+ form factor, 40Gb LM4 universal optical transceiver, 140m OM3 MMF, 160m OM4 MMF, 1km SMF, duplex LC, utilizes IEEE 802.3ba 40GBASE-LR4 4x10G channel plan adaptation referred to as 40GBASE-LM4 | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+| | Single-mode fiber for the maximum distance of 40 km | PAN-QSFP-40GBASE-ER4 | QSFP+ form factor, 40Gb ER4 optical transceiver, extended reach 40Km, SMF, duplex LC, IEEE 802.3ba 40GBASE-ER4 compliant | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+| | | PAN-QSFP28-100GBASE-BIDI | QSFP+ form factor, 100Gb Bidirectional optical transceiver, 70m reach over OM3 MMF, 100m over OM4 MMF, duplex LC| PA-7000 Series, PA-5450, PA-5250, PA-5260, PA-5280; NOTE: only models or series cited are supported, unlisted models or series are not supported |
+| | | PAN-QSFP28-100GBASE-CWDM4 | QSFP28 form factor, 100Gb CWDM4 optical transceiver, 2km, SMF, duplex LC| PA-7000 Series, PA-5450, PA-5250, PA-5260, PA-5280; NOTE: only models or series cited are supported, unlisted models or series are not supported |
+| | | PAN-QSFP28-100GBASE-ER4 | QSFP28 form factor, 100Gb ER4 optical transceiver, extended reach 25Km, SMF, duplex LC, IEEE 802.3ba 100GBASE-ER4 compliant| PA-7000 Series, PA-5450, PA-5250, PA-5260, PA-5280; NOTE: only models or series cited are supported, unlisted models or series are not supported |
+| | | PAN-QSFP28-100GBASE-LR4 | QSFP28 form factor, 100Gb LR4 optical transceiver, long reach 10km, SMF, duplex LC, IEEE 802.3ba 100GBASE-LR4 compliant| PA-7000 Series, PA-5450, PA-5250, PA-5260, PA-5280; NOTE: only models or series cited are supported, unlisted models or series are not supported |
+| | | PAN-QSFP28-100GBASE-SR4 | QSFP28 form factor, 100Gb SR4 optical transceiver, short reach 100m OM4 (70m OM3), 8/12 strand MPO, MMF, IEEE 802.3ba 100GBASE-SR4 compliant| PA-7000 Series, PA-5450, PA-5250, PA-5260, PA-5280; NOTE: only models or series cited are supported, unlisted models or series are not supported |
+| Direct Attach cable - 10 Metres | 40 Gbps. 10 meter Active Optic Cable (AOC). Cable and transceivers are bonded together. | PAN-QSFP-AOC-10M | QSFP+ form factor, 40Gb active optical cable with 2 transceivers and 10m of cable permanently bonded as an assembly. | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+| Direct Attach cable - 10 Metres | 100 Gbps. 10 meter Active Optic Cable (AOC). Cable and transceivers are bonded together. | PAN-QSFP28-AOC-10M | QSFP28 form factor, 100Gb active optical cable with 2 transceivers and 10m of cable permanently bonded as an assembly. | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+| Direct Attach cable - 5 Metres | 100 Gbps. 15 meter direct attach passive cable (DAC). Cable and transceivers are bonded together. | PAN-QSFP28-DAC-5M | QSFP28 form factor, 100Gb direct attach passive cable with 2 transceiver ends and 5m of cable permanently bonded as an assembly, IEEE 802.3bj 100GBASE-CR4 complian | PA-7000 Series, PA-5450, PA-5200 Series, PA-3260|
+==== QSFP28 Types ====
+QSFP+ (QSFP28) = 4 x 28 Gbit/s
+^ Type ^ Description ^ PAN Part ^ Pan Description ^ Supported Models ^
+| | Single-mode fiber for the maximum distance of 300 m| PAN-XFP-SR| XFP form factor, SR 10Gb optical transceiver, short reach 300m, OM3 MMF, duplex LC, IEEE 802.3ae 10GBASE-SR compliant| PA-4060|
+| | Multi-mode fiber for long reach 10 km.| PAN-XFP-LR| XFP form factor, LR 10Gb optical transceiver, long reach 10Km, SMF, duplex LC, IEEE 802.3ae 10GBASE-LR compliant| PA-4060 |