Differences

This shows you the differences between two versions of the page.

--- paloaltonetworks:vmseries:oracle [2020/10/23 12:31] – [Creating VM] bstafford
+++ paloaltonetworks:vmseries:oracle [2022/11/23 12:49] (current) – external edit 127.0.0.1
@@ Line 4: / Line 4: @@
 ===== Creating VM =====
-  * When you go to deploy the VM, you can only specify one interface. Make sure this is the management interface.   * You can add the others later. You should not specify a public IP now as you will want to reserve it (static) which you can do once the VM is deployed and booted.
+  * When you go to deploy the VM, you can only specify one interface. Make sure this is the management interface.
-By default, the boot volume is set to 60GB. You can increase this during the setup screen if you want more space for logs.
+  * You can add the others later. You should not specify a public IP now as you will want to reserve it (static) which you can do once the VM is deployed and booted. By default, the boot volume is set to 60GB. You can increase this during the setup screen if you want more space for logs.
   * Go to advanced options and then networking to set the static private IP 10.0.0.4
-  * Specify SSH public key using PuTTY.
+  * Specify SSH public key using PuTTY.  [[https://docs.paloaltonetworks.com/vm-series/9-1/vm-series-deployment/set-up-the-vm-series-firewall-on-oracle-cloud-infrastructure/prepare-to-set-up-the-vm-series-firewall-on-oci.html|This link]] gives more data. (i.e. save the private key but make sure you copy the public key from the text displayed on the PUTTYGen window rather than just saving the public key.
-https://docs.paloaltonetworks.com/vm-series/9-1/vm-series-deployment/set-up-the-vm-series-firewall-on-oracle-cloud-infrastructure/prepare-to-set-up-the-vm-series-firewall-on-oci.html
-(i.e. save the private key but make sure you copy the public key from the text displayed on the PUTTYGen window rather than just saving the public key.
   * You must supply bootstrap paremeters to the firewall even if you don't "normally " bootstrap
   * Click Show Advanced Options->Under User data-> select Paste cloud-init script
-  * hostname=palo-fw-03
+    * hostname=palo-fw-03
-  * authocodes=V5756013
+    * authocodes=V5756013
-  * op-command-modes=jumbo-frame
+    * op-command-modes=jumbo-frame
   * Deploy and let the machine boot.
   * Create the public IP for MGMT and create the VNIC for public VPC (ethernet1/1) and VNIC for private VPC (ethernet1/2). Be sure to do it in that order. Don't forget to add a public IP to the public interface.
@@ Line 20: / Line 18: @@
   * Log in
   * configure
-  * set mgt-config users admin password
+  * set mgt-config users admin password (it will then prompt you to type in the password).
   * Set ethernet1/1 and ethernet1/2 using the normal cloud system of two virtual routers. Next hop for external is 10.1.0.1.
   * When adding new VNIC, you will need to reboot the VM firewall for the firewall to detect the interfaces.
@@ Line 26: / Line 24: @@
 ===== VM Instances =====
-Remember VM.Standard2.4 is limited to four network interfaces. One for MGMT and three for dataplane.
+VM.Standard2.1 is limited to two network interfaces. One for MGMT and one for dataplane.
+VM.Standard2.2 is limited to two network interfaces. One for MGMT and one for dataplane.
+VM.Standard2.4 is limited to four network interfaces. One for MGMT and three for dataplane.
 VM.Standard2.8 is limited to eight network interfaces. One for MGMT and three for dataplane.
-Since 2020, VM.Standard2.1 will also cover a VM-100 if needed.
 ===== PAYG Costs =====